Iscar Announces A Completely New Line Of Slitting Cutters Using Tang-Grip Technology And The Sturdiness Of Sumo Tec Grades

Iscar at this time offers a family of high-performance slitting tools that join the convenience and security of Tang-Grip clamping with the added durability of the completely new Sumo Tec insert grades.

The notion, already demonstrated successful in Tang-Grip parting tools, has now been spread to slitting cutters. In the patented Tang-Grip clamping system, inserts are press-fit into their pockets with a distinct hand tool, and are clutched securely in place without the need without requiring clamps, upper jaws or set screws that can weaken the insert and disrupt chip flow. The pocket configuration uses cutting forces to hold the insert seated securely in position, preventing any prospect of insert pull-out. The Tang-Grip clamping system also fosters more accurate slitting cuts plus longer pocket and insert lifespan.

Iscar's Sumo Tec insert grades showcase a specific post-coating treatment which considerably boosts tool life and reliability.

Unveiled in late 2007, the new Sumo Tec treatment smooths the insert's coated surface to dispose of microscopic stress raisers, diminish heat and friction and enhance chip flow. The result is improved toughness and opposition to chipping and built-up edge, all leading to longer tool lifespan. The golden-colored side on Sumo Tec inserts facilitates wear detection. Size for size, Tangslit cutters offer more teeth than Iscar's SGSF cutters, permitting higher feed rates.

Their superior rigidity leads to straighter, increased accurate cuts and diminished vibration even in large-diameter cutters. The brand new Tangslit TGSF cutters come in 100 to 160 mm diameters, 3 and 4 mm widths and can accommodate the exact same assortment of inserts as Tang-Grip parting tools. Several other sizes will be added.

Available Sumo Tec grades for Tangslit cutters include:
IC808, with a tough submicron substrate beneath a Sumo Tec TiAlN PVD coating, providing outstanding resistance to impact loads and built-up edge. This grade is endorsed for slitting heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel.

IC830, presenting extra toughness for heavier parting & grooving including interrupted cuts. It is suitable for all stainless steel & high temperature alloys.

IC908, a hard, fine-grain substrate with outstanding chipping resistance, joined with a new Sumo Tec TiAlN PVD coating. It is perfect for nodular or gray cast iron.

IC928 and 928A, PVD TiAlN-coated tough grades suited for stainless steel, high temperature alloys and other alloy steels. These grades are additionally recommended for interrupted cuts and heavy operations.

All Tangslit and Tang-Grip inserts are attainable in J- or C-type chipformer geometries from Iscar.

Iscar Recently Releases Numerous Original Lines To Continue Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

Numerous Advancements Have Multiplied Iscar's Families Of Indexable Endmills For Elevated Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

The Most Recent In Carbide Endmill Configuration In A Extensive And Outstanding Family From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Push Pull Testing For Building Industry Supplying Calibrated Measuring Instruments. Mechanical Load Testing Procedures For On Site Proof To Testing Standards.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Brand New Cutters And Carbide Insert Arrangements From Iscar To Better Enhance The Machining Method
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.

New End Mills By Iscar Can Increase Productivity While Reducing Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Industrial Water Heater - Considering All Of Your Needs - Study With Care In Order To Know More
Looking into a commercial water heater? Then you have a few things that you must consider. Take a look at these areas to avoid making a mistake with the wrong unit.

Commercial Water Heater- Which Is Perfect For Your Requirements
If you are in the market for a commercial water heater then consider what the needed application is and your overall cost to determine which is best for you. Since there are so many to choose from you may have to do some calculating in order to match the need.

Related Articles

Resources